Bottle & Closure Testing Equipment

PET Bottle Burst Tester is specialized test equipment for testing the internal pressure resistance of PET bottles. 

This machine provides a relatively inexpensive way for determining the strength of bridge of a closure of PET Bottles. Digital controller has the facility of over load protection, peak hold and inbuilt calibration. The load directly indicated in kilograms or Newton.

This Equipment is to check pull out testing.  It is provides a relatively inexpensive way for determining the pull out force of Bottle Closure / Caps.

APPLICATION:

Closure Concavity Tester is useful for bottle closure. It is provided with digital gauge for more accurate measurements.

FEATURES:

• Features LCD display support
• Stainless Steel guide rod

Colour Matching Cabinet is used for visual inspection of any colour material like textile, paper, paint, ink, Plastic etc. Standard Light sources are used for accurate testing and inspection. Colour Matching Cabinet is made of Ply Board as per availability at the time of delivery. This Light Box is also known as Shade Matching Booth.

Technical Specification:

• All tube lights are operated separately by Electronic Ballast for instant start, power saving and to prevent tube lights.
• Control panel is ergonomically designed for easy operation.

Light Sources & Colour Temperature

• Artificial Daylight Fluorescent Lamps (D - 65) : 02 Nos. 
• Triphosphor Fluorescent Lamp (TL-84) : 01 Nos. 
• Ultra Violet Black Lamp (UV) : 01 Nos. 
• Cool White Fluorescent (CWF) : 01 Nos.
• Tungsten Filament Light : 04 Nos.

Optional

Triangle Sample Holder

Electrical Supply

Standard booths are made for connection to a electrical supply 210-250 volts, 50 HZ, single phase AC supply.

Degassing of carbonated beverages is necessary for quality control analysis. If there are variations in degassing it will influence values of PH, Brix Acidity & Aspartame results.

FEATURES

• Mini Air Generator 3 Ltr./Min X 2 Outlets
• Control Panel With Timer
• P.P. Flask Beaker For Test Sample
• Stainless Steel Tray
• Silicone Rubber Tubes
• Air Pump Operated
• Made From S.S 304 BASE And Control Panel
• Digital Timer With Auto Stop Function
• Acrylic Chamber For Air Filter.

Just press a button and on completion of time degassing will stop automatically.

APPLICATION:

The Base Clearance Gauge is specifically designed to measure the dome height in the bottom of PET containers. The Base Clearance Gauge comes complete with a high accuracy, digital readout with built-in port for serial communications. A see-through base ensures clear visibility as measurements are taken.

Used to measure the dome height in the bottom of the bottle

FEATURES

• Reliable and simple to use
• Thick acrylic base
• Ideal for at-the-line measurements near the blow molder
• Optimum functionality
• Durable Finish
• Longer functional life
• Mitutoyo dial gauge with digital output is fitted for accurate results

APPLICATION

Torque Tester is used for Measuring Incremental / Removal torque of closures. Round / Square/ Rectangular /Oval Bottles / Jars can be held.

FEATURES

Adjustable posts effectively grip a broad range of container shapes and sizes. Flat and custom made jaws are available for unique profiles. A rugged aluminum and Stainless steel design and simple operation allow for use in laboratory and production environments.

Drop test is intended for use in evaluating the capability of a container, corrugated box, filled bags, bottles and other similar items to with stand the sudden shock resulting from a free fall, 

APPLICATION

Capitalizing on our vast industry experience, we offer a premium quality range of gas volume testers which is also known as carbonation tester. These testers are extensively used to measure several types of gas chambers, pet and glass bottles. Apart from this, these testers are also used to measure the amount of dissolved carbon dioxide in carbonated drinks. In any aerated drink making unit, these testers are essentially required. These testers are available in two primary form of glass bottles fitted with crown caps and PET bottles with plastic ROPP caps. 

Application

This gauges are useful for inspection of pet bottles closures saves time required for inspection of closures. Made from stainless steel.

Preform / closure gauges

• Gauges for different neck sizes are available.
• 1810
• 1881
• 29/25
• 30/25
• Alaska

Closure

• Inside diameter
• Outside diameter
• Maximum diameter.
• Height.

Description

This High Accuracy Height Gauge offers you the following benefits:

Its double-column structure ensures high measuring accuracy.

Carbide-tipped scriber provided

Large character height provides good readability.

Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper analysis. PET bottle could be cut up to 5 predetermined sections, each section will be checked to ensure that it conforms to the exact weight assigned.

Feature : 

• Bottle cut with accuracy
• Rapid warming the wires
• Energy saving design
• Up to 5 sections cut
• Durable design
• Easy to operate
• Cutting up to 2 L bottle
• Safety cover design which exhausts gases out of face of the operator (optional)
• Excellent repeatability
• Preheating Mode / Cut Mode (heating max)

Main features:

• Dual heating mode saves energy and extends the life of wires
• Adjustable supports for bottles during the cutting process
• Graduated rulers allow accurate positioning of wires

Technical specifications:

• Sample range: Maximum height 360 mm
• Maximum diameter 110 mm
• Power supply: 220 VAC / 50Hz

The shaker is mounted on ball bearing crankshafts to give an orbital circular motion to the flasks within a diameter of 2". Body made of thick Mild steel duly powder coated .

SHAKING SYSTEM

The efficient and diligent shaking system of our shaker has a shaking movement which is powered by a reliable heavy duty DC motor. The variable speed motor at the base the complete unit is mounted on a angle iron frame. Compact counter balanced drive mechanism ensures high stability and reliability even in continuous operation & uneven load distribution.

SHAKING SPEED

• The variable shaking speed of shaker is between 50 RPM to 200 RPM
• Speed is controlled by mechanical speed controller.
• Supplied complete with cord & plug to work on 220 / 230 volts A.C. supply.
• Conforming ISO & CE, GMP certified product

Secure Seal Tester is designed to check bottle and closure thread integrity and Seal strength for Glass / PET Beverage Containers with Plastic Closures Most Useful for Carbonated Drinks.

Top Load Tester is used for measuring vertical strength of bottle. Good strength avoids damage of bottles during stacking, Transportation, Storage and packing. Bottle Compression Tester is efficient and easy to use equipment intended for measuring the ability of bottle to resist external compressive forces. This method describes how to determine the resistance of a bottle to compressive forces. This is accomplished by placing the bottle between two flat platens, one of which is mechanically driven to compress the bottle. A recording device is incorporated to indicate the force required to compress the bottle. The method is used to compare the compressive resistance of different lots of similar bottles or to compare bottles of different grades.

The instrument is made in two parts, one is for main instrument and the other is the control panel. The ultimate test is to determining overall quality and performance of the bottles and jars. The instrument is bright chrome plating, zinc plating, painted in metallic paints. It is supplied complied with electrical which include micro-switches, Push buttons and contactors for safe and convenient operation.

In Computerized model, we provide the Window based software which gives the different measurement parameter and the graph. The report can be printout by using proper printer. The variable speed model speed is vary by a knob fixed on the panel and the speed also digitally indicated on the control panel of the instrument or by simply types the speed on the monitor of the computer. Different model have speeds suitable for testing different materials. Various built in safety arrangements such as over travel protection, are provided.

The Vacuum Leak Tester can be used for checking seal strength of various products like Flexible Pouches / Cups / Blister Packs / Tablet Strip / Sachets / Bottles and many other similar packings.

This Vacuum Tester is for Filled Bottle finds usage for hot fill juices / jams ketchup / pulp /vacuum packed tea pouches. 

The equipment is suitable for testing containers of any form, material, kind, design with interior packing, means of closure and any size and weight.